30 Series - Station & Movable Clamps with Accumulator Head

Printer-friendly versionSend to friendPDF version

30 Series - SMC Extrusion Blow Molding Machines
Station & Movable Clamps with Upto 6 liters Accumulator Head

SMC 30 Series

30 Series

The production of major products (typically 20-30 liters and more) for a uniformly trained holistic sleeves is recommended to use the extrusion head storage (battery) of the type and location of blowing mandrel bottom with a stationary carriage, to avoid unnecessary movements of the massive site closure from the position of closure and vice versa . All these features provide a line of cars SMC S.

SMC S machines with large-sized knot closure optimal for the production capacities ranging from 20 to 50-60 liters. This is usually, industrial packaging (cans, barrels, bottles made of polycarbonate) and technical details (ducts, pipes, tanks, toys and other products with complex geometry, especially the automotive components).

The hydraulic system of Blow Molding Machines S Series is a combination of simplicity and efficiency of the series T series TG, working under pressure in the range 150-220 bar, and, above all, focused on the best opening / closing of a massive knot closure.

Oil pressure in the system creates a powerful Vickers vane pumps of constant performance. Application of simple and inexpensive to operate the permanent pumps on large machines entirely appropriate, given the long cycles of cooling of large items and long periods when the machine does not produce any movement.

Moves machine Series S - is, first of all, closing / opening, and pressing of blown Ornov, pulling hoses from the accumulation of the head and moving carriages, if dvuhstantsionnaya machine. All hydraulic movements, including the ejection sleeves, implemented proportional valves Bosch-Rexroth and Vickers with the control of the linear potentiometer. Proportional hydraulics can ensure a smooth and fairly rapid closure, despite the large size of the site closure and weight molds.

The system includes a hydraulic accumulator, a system of safety valves and two points of filtration (suction filter and filter-back). Components of hydraulic system supplied Bosch-Rexroth, Vickers, Tokimec and Parker, being used only original parts of these manufacturers. Support optimal (given) the oil temperature is carried out by a system of valve opens or closes the flow of cooling water in the oil cooler, and electronics, which monitors the actual temperature of the oil and filing the appropriate commands to the valve or stops the car completely in case of overheating oil.

SMC 30 Liters Machines Features:

• A choice of stationary or moving carriage clamping system
• Single station or double station machine production
• A choice of machine controllers; Omron, Barber Colman, Moog and Siemens
• Directional or Proportional valve control movement
• Designed to accommodate up to 60-liter container production
• Continuous head, or with Accumulator head of 4-liters for single station or 6-liters for double station
• Accurate clamping force application in clamp of diagonal box frame with direct clamping cylinders
• Suitability of additional in-line equipments for auto-finishing, trimming and product take out
• Provision of additional accessories such as;
  Core puller function
  Needle blow pin
  Unscrewing bow pin
  Product orientation
  and Other Robotic Applications
• With compact design, robustly built, reliable performance and extended durability
• Full conformity to CE safety regulations

SMC 30 Series - Machine Specification Chart

Disclaimer: Technical Data are subject to change in accordance with further development and are at the discretion of the manufacturer with out prior notice. Liabilities resulting from such changes are no manufacturer’s obligation.

Note:

• S = Station Clamp (Fixed Position)
• M = Movable Clamp (Horizontal Movement)
• D = Double Station