World's Leader of Blow Molding Machine Manufacturer

SMC T Series - Incline Movement and 3-Tie Bars Clamp

Posted Mon, 2009-11-16 15:33
Printer-friendly versionPrinter-friendly versionSend to friendSend to friendPDF versionPDF version

SMC T Series - The Standard Machine
Incline Movement and 3-Tie Bars Clamp

 

     
SMC T/DST
Single and Double Station
 

T Series

The most popular machines are equipped with clamping hub with three guides, suitable for most purposes the production capacities ranging from 10 ml to 5 liters (sometimes up to 10). The technical concept and design of the T series machines is time-tested and hundreds of customers worldwide.

Hydraulic system of Blow Molding Machines T series with a working pressure of oil within the 80-110 bar as simple and as a consequence, reliable, durable and easy to use.

Center is a hydraulic vane pump Vickers constant performance. Pumps series T, as a rule, have little power, so their consumption does not exceed (and in many sizes smaller), performance driven pumps, which are equipped with many European cars. However, constant capacity pump is easier and less fastidious in the long-term operation.

Fast carriages realized by a simple discrete valve flaps wrapped inhibition in both end positions of the carriage, and the closure is carried out in two speeds (two discrete gidroklapanami). Supply blown Ornov also controlled by discrete throttle valve with easy to install the base speed.

The system includes a hydraulic accumulator, a system of safety valves and two points of filtration (suction filter and filter-back). Components of hydraulic system supplied Bosch-Rexroth, Vickers, Tokimec and Parker, being used only original parts of these manufacturers. Support optimal (given) the oil temperature is carried out by a system of valve opens or closes the flow of cooling water in the oil cooler, and electronics, which monitors the actual temperature of the oil and filing the appropriate commands to the valve or stops the car completely in case of overheating oil.

 

Machine Features:

  • Directional valve control movement
  • A choice of machine controllers; Omron, Barber Colman, Moog, Beckoff and Siemens
  • Well proven direct-acting clamping system by 3-tie bars and alignment rod
  • Single station or double station machine production
  • Reliable and proven quality of 3-tie bars models for more than 20 years
  • With compact design, robustly built, reliable performance and extended durability
  • Suitability of additional in-line equipments like
    In-Mould Labeling (IML, for single stations only),
    Multi-layers (Co-Ex),
    View Stripe (VS)
    and Auto-finishing & trimming
  • Convenient and swift mould change due to open top and side design
  • Quicker machine assembly and faster delivery to customers
  • Full conformity to CE safety regulations

  

SMC T Series - Machine Specification Chart

SMC
Machine Model		 Unit 350
T

350
DST

 1000
T		 1000
DST		 2000
T		 2000
DST		 3000
T		 3000
DST
 3000
DSTL
 5000
T
 5000
DST
General Specification
Capacity ml 500 500 1000 1000 2000
 2000 3000 3000 3000 5000 5000
Clamping Force kN 14 14 16 16 25 25 50 50 50 120 120
Mould Dimension & Clamping stroke
Width mm 240 240 280 280
 300
 300
 320 360 440 380 480
Length
 mm 170 170 260 260 320 320 350 350 300 420 420
Thickness
 mm 80 80 120 120 160 160 200 200 160 250 250
Minimum Closing
 mm 75 75 115 115
 115 115 190 190 155 240 240
Maximum Opening mm 225 225 300 300
 300
 300
 445 445 355 530 530
Clamping Stroke mm 150 150 185
 185 185 185 255 255
 200 290 290
Extruder Unit
Screw Diameter mm 38
 45 45 52 52 60 60 70 80 70 90
Screw Length L/D 24D 24D 24D 24D 24D 24D 24D 24D 24D 24D 24D
Hydraulic Unit
Oil Tank Capacity liter 150 180 160 270 270
 300 300 350 380 350 450
Operating Pressure bar 75 75 80 80 80 80 100 100 100 100 100
Energy Consumptions
Total Connected Load kW 15.8 21 21 25.5 25.5
 29.8 29.8 40.3 53.3 40.3 64.1
Average Power Consumption kW 9.5 12.6 12.6 15.3 15.3 17.8 17.8 24.2 31.9 24.2 38.5
Required Air Pressure bar
 6-8 6-8 6-8 6-8 6-8
 6-8 6-8 6-8 6-8 6-8 6-8
Cooling Pressure bar 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4
Hydraulic Cooling kcal/h 4300 5800 5800 7200 7200 8500 8500 11500 15000 11500 18500
Machine Dimension & Weight
Width mm 1085 1810 1280 2075 1400
 2225 1630 2510 2900 1827 3110
Length mm 2105 2350 2850 2900 3055 3055 3270 3300 3565 3750 3875
Height mm 2000 2000 2200 2330 2400 2400 2600 2600 3000 3000 3000
Weight kg 1350 1800 2800 4000 3500 4600 4100 6800 7200 5400 9000

Disclaimer: Technical Data are subject to change in accordance with further development and are at the discretion of the manufacturer with out prior notice. Liabilities resulting from such changes are no manufacturer’s obligation.

 

Note:

  • T   = Three Tie Bars (incline) series
  • DS = Double Station
  • L   = Extra Long Carriage Stroke