XL Series - SMC Extrusion Blow Molding Machine with 2 Tie Bars

Printer-friendly versionSend to friendPDF version

XL Series - SMC Extrusion Blow Molding Machine
Inclined Movement with 2 Tie Bars

SMC XL Series

SMC XL Series

Blow Molding Machine with the classical concept of closing the site with two guides series XL (or other 2-tie-bar, from the English. "Two guides) have a narrow field of application for products up to 10 liters, but extremely well for industries with rapidly change molds, complex geometry parts and molds for long.

It is with the concept of two guides, located on two opposite corners of the plate, started the production of extrusion blow molding machines with a top blowing all over the world. However, today most European manufacturers of blow molding machines in the quest for increased speed and thus increase the number of nests and in-car options, no longer pay attention to the time-tested and still topical solutions.

Machinery Series XL / 2 tie-bar company SMC produces longer than any other of its rulers. These machines have only one minus sign (inability to use the automatic in-machine srubki Oblomov), but are not so often, but buyers, the specific tasks which it decides to continue to appreciate these machines on its merit. Needless to say, what car SMC 5000XL company STAMM was conquered by Russia's market barrels for the drawings.

The hydraulic system of Blow Molding Machines XL series with the working oil pressure within the 80-110 bar is identical to the series T, the most simple and, as a consequence, reliable, durable and easy to use.

Center is a hydraulic vane pump Vickers constant performance. Pumps series XL, as a rule, have little power, so their consumption does not exceed (and in many sizes smaller) performance driven pumps, which are equipped with many European cars. However, constant capacity pump is easier and less fastidious in the long-term operation.

Fast carriages realized by a simple discrete valve flaps wrapped inhibition in both end positions of the carriage, and the closure is carried out in two speeds (two discrete gidroklapanami). Supply blown Ornov also controlled by discrete throttle valve with easy to install the base speed.

The system includes a hydraulic accumulator, a system of safety valves and two points of filtration (suction filter and filter-back). Components of hydraulic system supplied Bosch-Rexroth, Vickers, Tokimec and Parker, being used only original parts of these manufacturers. Support optimal (given) the oil temperature is carried out by a system of valve opens or closes the flow of cooling water in the oil cooler, and electronics, which monitors the actual temperature of the oil and filing the appropriate commands to the valve or stops the car completely in case of overheating oil.

XL Series Features:

• Extruders Euroimpex with electric or hydraulic drive (at the customer's choice)
• Heads for the continuous extrusion of the number of streams from one to four
• Heads for the accumulative (battery) extrusion with a volume of 2.5 liters
• Cold or hot cutting and other methods of processing Sleeves (client's choice)
• Parizon control (optional)
• Application of transparent strips (optional)
• Multi-stage blowing (played by CE)
• Blowing products with an inclined neck (optional)
• Blowing a needle (optional)
• Wringing blowing mandrel (optional)
• Controller Omron PLC or Beckhoff (client's choice)
• Drive hydraulic cores (optional)
• Central lubrication system (standard)
• Implementation of CE or non-CE (client's choice)

Additional optional capabilities

• Extruders and extrusion heads Bekum
• Cooling Systems Compressed Air
• Systems labeling of IML technology